Fujitsu LIFEBOOK T734 Operating Manual page 126

User Settings
The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and
Enrollment. User settings allow users to customize OmniPass to suit their individual
preferences. Under User Settings (Audio Settings and Taskbar Tips) you can set
how OmniPass notifies the user of OmniPass events (e.g., successful login, access
denied, etc.). The details of each setting under the Audio Settings and Taskbar
Tips interfaces are self-explanatory.
The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll
Chapter 2.3
and authentication device refer to . To enroll additional fingerprints, click
Enroll Authentication Device, and authenticate with OmniPass. Select the
fingerprint recognition device in the Select Authentication Device screen (it should
already be marked by a green check if you have a finger enrolled) and click Next.
System Settings
The OmniPass Startup Options interface can be found in the System Settings tab.
With these options you can specify how your OmniPass Logon is tied to your
Windows Logon.
The first option, Automatically log on to OmniPass as the current user, will do just
as it says; during Windows login, you will be logged on to OmniPass using your
Windows login credentials. If the user logging into Windows was never enrolled
into OmniPass, upon login no one will be logged on to OmniPass. This setting is
appropriate for an office setting or any setting where users must enter a username
and password to log into a computer. This is the default setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will
prompt you to login once you have logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not
prompt for a user to be logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon
and clicking Log in User from the right-click menu.
Troubleshooting
You cannot use OmniPass to create Windows users. You must first create the
Windows user, and you will need administrative privileges to do that. Once the
Windows user is created, you can add that user to OmniPass using the same
username and password
Appendix 124