Settings Relating To Keys, Wipes, Frame Memory And Color Correction (Key/Wipe/Fm/Ccr Menu); Settings Relating To Keys, Wipes, Frame Memory And Color Correction; (Key/Wipe/Fm/Ccr Menu) - Sony MVS-8000 User Manual

Settings Relating to Keys, Wipes, Frame Memory and
Color Correction (Key/Wipe/FM/CCR Menu)
For settings relating to keys, wipes, frame memory and Color Correction, use
the Switcher >Key/Wipe/FM/CCR menu.
To display the Key/Wipe/FM/CCR menu
In the Engineering Setup menu, select VF3 'Switcher' and HF5 'Key/Wipe/
FM/CCR.'
The status area shows the key memory settings, mask and border processing
order, key priority, cross-point hold, pattern limit transition, and wipe edge
settings for each of the M/E and PGM/PST banks.
Switching video process memory on or off
In the Switcher >Key/Wipe/FM/CCR menu, press [Video Proc Memory],
turning it on. (See also "Switcher Setup" in Chapter 1 (Volume 1).)
Settings for the show key function
1
In the Switcher >Key/Wipe/FM/CCR menu, press [Show Key].
The Show Key menu appears.
2
In the <Show Key Enable> group, press the signal for which "show key"
is enabled, turning it on.
3
To set the time for which "show key" is held, press [Hold Time].
4
Adjust the following parameter.
Knob
1
Settings for key auto drop function
Note
This function is only valid in standard mode.
The "key auto drop" function automatically switches off a particular key when
you press a cross-point button in a bus that outputs the background on the
particular switcher bank (PGM/PST, or M/E-1 to M/E-3).
Parameter Adjustment
Hold Time Show key hold time
Setting values
0 to 999 (frames)
Setup Relating to Switcher Processor
407