Temperature; Logbook; Licence Information - Siemens CFMC1315-LP Configuration

9.10.4

Temperature

9.11

Logbook

9.12

Licence information

Building Technologies
Fire Safety & Security Products
Network Camera Click Reboot.. The confirmation message will be displayed. Click OK
Reboot to reboot the network camera.
1. Select System > Temperature.
2. Configure the options as described in the table below.
3. Click Save.
Display Type Select the desired temperature scale (C=Celsius, F=Fahrenheit)
Temperature The internal temperature of the camera is displayed in the selected
temperature scale.
Temp. If a temperature notification interval has been set an e-mail will be
notification delivered continuously according to the interval set when the defined
Interval temperature is exceeded. If the notification interval is set to "0", the e-
mail notification is deactivated.
1. Select Log.
2. Click the buttons to display the desired logbooks or to delete all logs.
Select Notice.
All licence information for the camera will shown.
Configuration
CFMC1315-LP Configuration Manual EN
05/05/2009
57