9.5.3
E-Mail Recording
Building Technologies
Fire Safety & Security Products
Recording by Alarm or Motion
Record Source
Select the recording format: JPEG or MPEG4.
Record Frame
Set the number of images to be recorded immediately after an alarm
occurs.
Recording Cycle Set a time interval for alarm recording.
Recording Time
If MPEG4 is selected, the recording time can be set.
Recording by Network Loss
Recording Cycle Set a time interval for recording cycle.
You can receive images by setting your e-mail account.
1. Select Record > E-mail Recording.
2. Configure the options as described in the table below.
3. Click Save.
Configuration
CFMC1315-LP Configuration Manual EN
05/05/2009
45