Removing The User Interface Board - Whirlpool KDDC24RVS Technical Education

REMOVING THE USER INTERFACE BOARD

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Figure 1
1. Remove the four screws securing the user
interface housing to the drawer front,
see figure 1.
Figure 2
2. Separate the housing from the drawer
front, see figure 2.
3. Remove the insulation between the hous
ing and the user interface board,
see figure 3.
Figure 4
4-4
Figure 3
4. Locate and remove
the eight screws
securing the user
interface board to
the housing.
NOTE: There are
holes in the housing
to allow access to the
screw heads,
see figure 4.
5. Lift out the user
interface board,
see figure 5.
Figure 5