Cleaning The Milk Pipework Of Any Blockages - Miele Built-in coffee machine Operating And Installation Instructions

Cleaning the milk pipework of any blockages

If the quality of the milk froth is not
satisfactory, the air suction tube could
be blocked. Follow the instructions
under "Step 2: Cleaning the air suction
tube and the elbow connector in the
door".
If only steam and no milk flows out of
the central spout, follow the instructions
in steps 1 to 4.
Firstly check whether the milk in the
milk flask has spoiled. This can
cause a blockage in the milk
pipework.
To clean the blocked milk pipework,
proceed step by step. Afterwards
check whether the preparation and
quality of the milk or milk froth is
satisfactory.
If the preparation and quality of the milk
and milk froth is not satisfactory, carry
out all described steps again without
preparing drinks in between.
Step 1: Cleaning the milk
pipework in the milk flask lid
^ Pull the milk suction tube a out of the
milk flask lid.
Make sure you remove the seal b as
well.
^ Clean both parts under running
water.
Insert the cleaning brush supplied in
the stainless steel tube and move it
back and forth until all milk residues
have been removed.
^ Also clean the milk pipework in the lid
using the cleaning brush.
73