10
Medalist Pro 6450, Medalist Pro 6451, Rev. C
Drive
ST36450A
LBA addressing
CHS addressing
ST36451A
LBA addressing
CHS addressing
Note. This drive does not use the write precomp or landing
zone parameters. Set these parameters to zero.
Recommendation
After you configure your computer, we recommend that you use
Disk Manager to partition and format your drive. If your computer
was built before mid-1994, you probably will not be able to
access the full capacity of your new drive unless you use Disk
Manager . See page 14 for information about "Installation using
Disk Manager."
If you do not want to use Disk Manager, you can use the stan-
dard DOS commands to partition and format your drive, as
described on page 16.
BIOS Settings
Cylinders
Heads
833
240
13,328
15
833
240
13,328
15
Sectors
63
63
63
63