Seagate Medalist Pro 6450 Installation Manual page 11

Medalist Pro 6450, Medalist Pro 6451, Rev. C
Figure 3. Mounting screws
3. You can mount the drive in any orientation. Usually it is
mounted with the circuit board down.
4. Slide the drive carefully into the drive bay. Secure the drive
with four 6-32 UNC mounting screws in either the side-
mounting holes or the bottom-mounting holes. The screws
should be inserted no more than 0.22 inch (5.58 mm) into the
bottom-mounting holes and no more than 0.14 inch (3.55
mm) into the side-mounting holes.
Caution. To avoid possible damage to the drive, do not
!
overtighten the screws or use metric screws.
7