Calling Features - Motorola Broadband User Manual

WavePhone

Calling Features

The following features are included with Unlimited Phone or can be added to our other phone plans for
an additional monthly charge.
• Call Waiting
feature comes automatically activated when included with or added to your Wave Phone service.
Cancel Call Waiting (*70)
before making the call.
• Caller ID & Call Waiting Caller ID
come automatically activated when included with or added to your WavePhone
• Caller ID Block (*67)
per call basis. Enter the code before making the call.
• Disable Caller ID Privacy (*82)
before making the call.
Note:
This feature is used if you have Caller ID Privacy set as a permanent feature on your WavePhone
You will receive a message when calling an individual who does not accept anonymous calls. Simply hang
up, dial *82 and try again.
• Disable Inbound Caller ID (*85)
*65 will re-enable the feature if it has been disabled using *85. Please note: *65 will only enable from
a disabled state. It cannot activate the caller ID feature.
• Repeat Dial (*66)
receiver again and enter the code. The system will continue to call the last number you dialed for up
to 30 minutes. Once that line is free, your phone will ring with a distinctive ring. You may continue to
make and receive phone calls as normal while this feature is activated.
Cancel Repeat Dial (*86)
• Return Call (*69)
is busy it will continue to redial the number for up to 30 minutes.
Note:
If the caller is calling you from a cellular phone, this feature will tell you the number of the last caller
but you will receive a busy signal if you attempt to dial them back through the Return Call menu. Simply
hang up and dial the number directly.
Cancel Return Dial (*86)
• Call Forward (*72)
calls to a long distance number, long distance charges may apply depending on your Wave Phone
package. To activate Call Forwarding, press *72, wait for the confirming beeps, and then enter the
phone number you would like calls forwarded to. You will immediately get a courtesy call at the
phone number where calls will be forwarded. Answer the courtesy call to activate Call Forwarding.
If you cannot answer the courtesy call, you must dial *72 again from your WavePhone
the confirmation tone.
Cancel Call Forward (*73)
36
™
– A tone will announce an incoming call when you are already on the phone. This
– Block your Caller ID information from displaying on outbound calls on a
– If you receive a busy signal when making a call, you can hang up, pick up the
– Return the call of the last person who called you. Like Repeat Dial, if the line
– Disable return call before the 30 minute time frame is over.
– Forward incoming calls to another telephone number. If you forward
– Turn off call waiting on a per call basis. Enter the code
– View caller information for incoming calls. These features
– Turn off Caller ID Privacy on a per call basis. Enter the code
– Turns off any caller ID information when receiving a call.
– Disable repeat dial before the 30 minute time frame is over.
– Disables current call forwarding.
service.
™
.
™
and wait for
™