Unit Address - Motorola DCH70 Installation Manual

Cable receiver
Hide thumbs Also See for DCH70:
Table of Contents

Advertisement

4 DIAGNOSTICS

Unit Address

This diagnostic displays the 16-digit (40-bit) unit address of the set-top.
The Unit Address fields are:
Field
Unit Address
Network
Address
TVPC
CableCARD
Inserted
Multicast 16
Address For
Seed Health
Serial
Number
MAC
Addresses
Description
A unique decimal number that indicates the unit address or physical address (13 address
digits and three check digits)
The network address in decimal format (13 address digits and three check digits)
The TV Passcard Address in decimal format (13 address digits and three check digits)
YES — CableCARD is inserted
NO — CableCARD is not inserted
The Multicast 16 address numbers change to display the values for each data stream in
TCP/IP decimal byte form. The valid stream types are:
Net — Network
EMM — EMM
SCC — SCC_ECM
DWLD — Download
DATA — Data
POLL — Polling packet identifier (PID)
This value represents the health of the set-top and should be 0xFF. If it is not 0xFF, see
the
"Troubleshooting"
section for more information.
The Host Serial Number is displayed on the Unit Address diagnostic screen.
The USB and DCH70 MAC addresses are stored in protected flash and displayed in
hexadecimal.
23

Advertisement

Table of Contents
loading

Table of Contents