FUNAI TD5B-N8481ZB Quick Setup Manual

E3NF0BD_QSG_EN.fm Page 1 Wednesday, May 21, 2008 6:08 PM
Finalising Discs
Finalise
You will need to finalise discs to play them back in other players.
SETUP
1
In stop mode, press [SETUP].
2 Select "DVD Menu" using [U / D], then press
[ENTER/OK].
3 Select "Finalise" using [U / D], then press
[ENTER/OK].
ENTER
/OK
4 Select "Yes" using [U / D], then press [ENTER].
Finalising will start.
Note
• Finalising may take awhile to be completed.
• Even after VR mode DVD-RW disc is finalised, you can still record or
edit. After you finalise DVD-R disc, you cannot edit or record anything
else on that disc.
• DO NOT power off during finalising. This may result in a malfunction.
VCR Playback / Recording
Playback
1
Press [STANDBY-ON ] to turn on the unit.
To play back a tape, turn on the TV and be sure to select the
input to which the unit is connected.
VCR
2
Press [VCR].
PLAY
3 Insert a pre-recorded tape, then press [PLAY P] to
begin playback.
PAUSE
4 During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
PLAY
5 Press [PLAY P] to resume playback.
STOP
6 Press [STOP S] to stop playback.
7 Press [OPEN/CLOSE EJECT O] to eject the tape.
Note
• When a tape without record tab is inserted, the unit will start playback
automatically.
• Tracking will be automatically adjusted upon playback. To adjust the
tracking manually, press [PROG. / ].
FUNAI HELPLINE
0870 383 3010
FOR ANY HELP WITH THIS PRODUCT
© 2008-2009 FUNAI EUROPE GMBH. All rights reserved.
Printed in P.R.C.
HDD/DVD Playback
Direct Playback
1
Press [STANDBY-ON ] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
If you are playing back the titles in HDD, press [HDD] first,
then proceed to step 5.
if you are playing back the titles in DVD, press [DVD] first.
2 Press [OPEN/CLOSE EJECT O] to open the disc
tray.
3
Place the disc on the disc tray with its label facing
up. Be sure to align the disc with the disc tray
guide.
4 Press [OPEN/CLOSE EJECT O] to close the disc
tray.
• For DVD-Video, proceed to step 6.
5
For HDD and DVD-R/-RW, press [TOP MENU] to
display the Title List/Title menu, then select
desired title using [U / D / L / P].
• You can switch between the "Original" and "Playlist" in the
HDD or VR mode DVD-RW disc using [MENU/LIST].
PLAY
6 Press [PLAY P] to start playback.
Playback will start.
• Depending on the media, the playback may start from a
resume point. (See page 54 on the Owner's Manual for
details.)
• If you are playing back a DVD-Video, a Disc menu may
appear. (See page 53 on the Owner's Manual for details
about the Disc Menu.)
STOP
Press [STOP S] to stop playback.
7
Note
• Some discs may start playback automatically.
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing [the Number buttons] or
[PROG. / ] on the remote control.
• There is a tape with a record tab in the unit.
Tape speed Recording / Playback Time
Type of tape E60 E120 E180 E240
SP mode 1 hour 2 hours 3 hours 4 hours
LP mode 2 hours 4 hours 6 hours 8 hours
1
Turn on the unit and insert a recordable tape.
Make sure that the TV input is set on the unit.
VCR
2
Press [VCR].
REC
3
Press [REC] to start recording.
To temporarily stop recording or to resume it, press
[PAUSE p].
After the unit has been in pause mode for 5 minutes, it will
stop automatically to protect the tape and the video head
from damage.
STOP 4 Press [STOP S] when the recording is completed.
1VMN25354 / E3NF0BD
EN
Quick Setup Guide
Congratulations on your purchase of FUNAI HDD & DVD / Video Cassette Recorder. This Quick Setup Guide takes you through the first-time setup with
simple instructions so you can enjoy exceptional audio and video quality as soon as possible. Please refer to the Owner's manual for detailed instructions.
If you have read your instructions and still need assistance, call the helpline at 0870-383-3010. Unless stated, for all the procedures described use the
remote control.
Recording and Playback Information
Playable Discs
Disc Logo Disc
DVD-RW
DVD-Video
(VIDEO/VR mode)
DVD-R CD-DA
(VIDEO mode) (AUDIO CD)
CD-R CD-RW
(CD-DA FORMAT, (CD-DA FORMAT,
MP3, JPEG files) MP3, JPEG files)
Kodak Picture CD
Connecting to a TV
Using the Scart jack
Audio/Video cable (not supplied)
RF cable
(supplied)
Antenna or
Scart cable
Scart/RCA cable
cable signal
(not supplied)
(not supplied)
Scart adaptor
(not supplied)
RF cable
(not supplied)
IN
OUT
Connect AV1 (TV) Scart jack of this unit to the Scart jack of your TV.
Use a commercially available Scart cable.
Note
• If your TV does not have a Scart jack, use a commercially available
Scart adaptor or Scart / RCA cable to connect.
• Connect this unit directly to the TV. If the AV cables are connected to a
VCR, pictures may be distorted due to the copy protection system.
Note for a TV with no Scart jack:
• This unit has no RF modulator, so this type of TV cannot be used.
TD5B-N8481ZB
Recordable Discs
Logo Disc type Disc format Functions
Video Playing back, Limited
mode recording, Limited editing
Playing back, Recording,
VR mode
Original / Playlist editing
Video Playing back, Limited
mode recording, Limited editing
This unit can play back DVD discs labelled with the
following region codes only:
2
Using the COMPONENT VIDEO OUT jacks and the
AUDIO OUT (L\R) jacks (for HDD, DVD or Tuner)
Component
AUDIO IN
Video IN
Y P B /C B P R /C R
Component
Audio cable
Video Cable
(not supplied)
(not supplied)
HDMI OUT
If your TV has Component Video input jacks, use a Component
Video cable (to connect the COMPONENT VIDEO OUT jacks) and
an Audio cable (to connect the AUDIO OUT (L\R) jacks).
1
Connect the COMPONENT VIDEO OUT jacks of this unit
to Component Video input jacks of your TV. Use a
commercially available Component Video cable.
2
Connect the AUDIO OUT (L/R) jacks of this unit to the
analogue Audio input jacks of your TV. Use a
commercially available Audio cable.
After you have made the connections, set the "Video Out" setting. (See
page 75 on the Owner's Manual for details.)
EN