Launching Ventus Application; Upgrading Clone Or Binary File On Tv; Updating The Application With New Model - Samsung HG22EA470UW Installation Manual

y Launching Ventus application
Go to File Menu → Utility → Generate and click on GO for Launch Ventus
y Upgrading clone or binary file on TV
To upgrade the clone for binary file on TV, keep prepared merged stream (Binary_outputstream.mpg or clone_
outputstream.mpg).
1. Locate stream file in Modulator utility ( as explained in 2.11).
2. Set the set channel to broadcast the stream by clicking on Frequency Table.
3. Select Opencable for ATSC or DVB-C for DVB models.
4. Click Play Button to broadcast the stream.
5. In TV's factory menu, SIRCH channel must be same as the channel on which stream is broadcasting.
6. And SIRCH version must be smaller than the software version set before generating stream file.
7. Click on Manual SIRCH. (Please check channel setup is set to Cable not Air if cable is connected to TV for
broadcasting.)
y Updating the application with new Model
To update the application with new model, so that you can configure the clone files for that model user must possess a
model installation XML file. To update new model user must follow following steps:
1. Go to File Menu → Update New Model.
2. A window (Add/Update Model) will open and asks user to enter
Configuration file (Model installation xml file).
3. To locate model installation xml file click on browse button. A file
browser window will open where user can locate the file.
4. After selecting the installation file, window will show model name,
series, region and TV model name in the textboxes which are
disabled to user.
5. To add model click on Add button. If model already exists
application will update the model otherwise it will add the model in
the model dropdown box.
6. To close the window click on Close button.
[Hotel-XC]Install Guide-ENG.indd 41
41
English
2012-03-30 1:28:04