Descaling - Breville Brita Instructions For Use Manual

Descaling

Descaling your Hot Cup
To maintain it's performance, your Hot Cup will require descaling once every three
months or so. You may need to descale your Hot Cup more frequently if you live in a
hard water area.
By changing the MAXTRA
often. BRITA recommends to exchange the MAXTRA
®
1. Completely remove the lid and remove the filter funnel and filter. Fill your Hot Cup
to the MAX marking on the water chamber and place an empty cup on the drip
tray. Replace the lid. Select a suitable setting for the dispensing control and press the
start button. Wait for the water to be dispensed into the cup.
2. Add a citric acid-based proprietary descaling product to the hot water in the cup
and stir.
3. Tip the contents of the cup into your Hot Cup and close the lid.
4. Place the empty cup on the drip tray and press the start button.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until your Hot Cup is empty. Fill your Hot Cup with fresh
water to the MAX fill level and place an empty cup on the drip tray.
8. Press the start button and wait for the water to be dispensed into the cup.
9. Discard the water in the cup.
10. Repeat steps 8 and 9 until your Hot Cup is empty. This will rinse any remaining
descaling solution from your Hot Cup
11. When your Hot Cup is completely cleaned, reinsert the filter funnel and filter. Your
Hot Cup is ready for use again.
12
cartridge more frequently, you will need to descale less
®
cartridge every 4 weeks.
®