Table of Contents
Advertisement
Continuous heater operation
B
E71350
WARNING
The heater will continue to
operate after the ignition is
switched off. Switch the heater off to
avoid unnecessary heating.
Press and hold button B. Press
button C. The heater will now
operate until button C is pressed
again. The display will light up and
show the clock time and the heating
symbol.
Programmable heating mode
The heater will come on automatically
at the activated pre-set start time,
and will stay on for the programmed
duration. The display will light up and
show the remaining heating duration
and the heating symbol.
You can program up to three
different pre-set start times.
Climate control
Programming the pre-set
heating start times
C
E71351
Press button A repeatedly, until the
symbol (1, 2 or 3) for the desired
pre-set time is displayed. Press
buttons B and D to set the time. To
adjust the time rapidly, press and
hold the respective button.
After programming the pre-set start
times press button A. The display will
show the clock time with the colon
flashing.
63
A
D
B
Advertisement
Table of Contents
