SECTION 3
B. KEEPING THE WATER SOFTENER CLEAN
CARE OF YOUR WATER SOFTENER
FIG. 11
Cap
O-ring Seal
Screen Support
Screen
Nozzle & Venturi
Gasket
IMPORTANT: Be sure small
holes in the gasket are cen-
tered directly over the small
holes in the nozzle & venturi
housing.
*Flow Plug
(HVDC)
Nozzle & Venturi
Housing
*Install with numbered side up, concave
side down. Be sure the largest flow plug is
located in the nozzle & venturi housing.
*Flow Plug
(1-EP)
Screen