Electrical Installation; Cupboard Design - Defy 600STS Owner's Manual

Introduction
Congratulations on the purchase of this quality product.
We trust that you will enjoy many years of trouble free use. Please
read these instructions carefully before using the oven and hob. This
manual will provide you with information on how to operate and
care for your product in order that you gain the maximum benefit
from it.
Unpacking
•
Please ensure that packaging material is disposed of in a responsible manner.
•
Plastic bags should be cut up to prevent children playing with them and accidentally
•
Please ensure that packaging material is disposed of in a responsible manner. Plastic
suffocating.
bags for example should be cut up to prevent children playing with them and acciden-
•
Remove all packing from the oven cavity and position the accessories.
tally suffocating.
•
If the appliance is damaged in any way, do not use it. Report the damage to your
•
If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
dealer, who will take the necessary corrective action.

Cupboard design

•
Cooking appliances generate considerable heat. The layout and materials of the
mounting cabinet should take account of the characteristics of the oven.
•
Surfaces immediately adjacent to the oven should be able to withstand temperatures
of up to 100 C without delaminating or discolouring.
•
Because the oven vents through the handle, overhanging doors and worktops above
the oven may be subjected to heat as well as condensation if very moist foods are
being cooked.
Electrical
installation
•
This appliance should not be connected through an earth leakage system.
Refer to S.A.B.S. 0142.
•
Place the oven on the floor in front of the aperture and make the electrical connection
before installing. This will ensure enough cable length for subsequent servicing.
Connection to the power supply must be carried out by a licensed electrician, who will
ensure that the oven is correctly connected and safely earthed. The rated current is printed
on the serial number label attached to the oven side trim.
The appliance must be connected to the mains through a double pole isolating switch
which has a minimum clearance between the contacts of 3 mm. in both poles.
A means for disconnection must be provided in the fixed wiring.
Hob to oven connection — Two 6 pin electrical plugs are used. ( Refer to label on oven )
2
"This appliance must be
and the manufacturer and the
do not accept
for any
due to incorrect
or electrical