Centrifugal Clutch - Husqvarna 50 Workshop Manual

Centrifugal
7
Clutch
Disassembly
Remove the spark plug and thread the piston stop P/N
5025033-01 into the spark plug opening in the cylinder.
Make sure that the piston stop is threaded
Rotate the clutch clockwise by hand until the piston
contacts the piston stop. The clutch hub has left-hand
threads. Loosen the clutch hub in a clockwise direction
and remove the clutch.
Slide the clutch drum with drive sprocket, needle bearing
and washer from the crankshaft. Clean the parts.
NOTE !
completely into the cylinder.