Connectors; Temperature Sensor Connector: Jrt1; Ata133 Hard Disk Connector: Ide1 - MSI Super Q965 User Manual

Connectors

Temperature Sensor Connector: JRT1

This connector is used to connect an external temperature sensor.

ATA133 Hard Disk Connector: IDE1

The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller
that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100/133 function. You can
connect hard disk drives, CD-ROM and other IDE devices.
Important
If you install two IDE devices on the same cable, you must configure the drives
separately to master / slave mode by setting jumpers. Refer to IDE device's
documentation supplied by the vendors for jumper setting instructions.
IDE1
Hardware Setup
2-9