Adjusting Screen With One-Touch - Hitachi CP-X880W User Manual

ADJUSTING SCREEN WITH ONE-TOUCH

FOCUS
BLANK
ASPECT
PUSH
ENTER
ESC
POSITION
MAGNIFY
ON
OFF
WIRELESS
NOTES
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
Downloaded from www.Manualslib.com
ZOOM PAGE Press the ONE TOUCH button
1
DOWN
You can activate the following functions just by
pressing the ONE TOUCH button:
LASER
(1) Signal search: Cycle through input signals, displaying
• When BNC (RGB) is selected:
RGB
MENU RESET
AUTO PinP
COMPONENT VIDEO
VOLUME
• When BNC (COMPONENT) is selected:
FREEZE MUTE
RGB
KEYSTONE ONE TOUCH
COMPONENT VIDEO
(2) Automatic adjustment: In RGB mode, automatically
(3) Automatic keystone distortion correction: This is only
manuals search engine
the images of retrieved signals. If no signal is found,
returns to the signal that was selected before the search
was begun.
BNC(RGB)
S-VIDEO
BNC(COMPONENT)
S-VIDEO
adjust the picture position and size; for VIDEO input,
automatically select the signal mode. (
performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects
vertical keystone distortion due to the (forward/backward)
setup angle of the main unit. (Vol.2
ONE TOUCH
DVI
VIDEO
DVI
VIDEO
)
)
23