I/O Back Panel And Connectors&Jumper Setting; I/O Back Panel; Connectors&Jumper Setting - HP XP-P4IM533GV User Manual

1.2. I/O Back Panel and Connectors&Jumper Setting
1.2.1.

I/O Back Panel

PS/2 Mouse
PS/2 Keyboard
COM A
PS/2 Keyboard
PS/2 Mouse connector
USB
(Universal Serial Bus Port)
LAN (RJ45 LAN Port)
Parallel port (LPT)
COMA (Serial port)
VGA port
LineOut
Line In
Mic In
1.2.2. Connectors&Jumper Setting
FDD (Floppy Disk Drive Connector)
The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one
edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the
connector.
2
1
IDE1 / IDE2 (IDE1 and IDE2 Connector)
The IDE connector is able to connect two IDE devices via an IDE cable and requires checking
of the IDE jumper setting. It is recommended that the hard drive be connected to the first IDE
connector while the optical drive be connected to the second IDE connector.
2
1
6
Parallel Port
USB
VGA
Connects PS/2 standard keyboard and PS/2 standard
mouse
Prior to use, please make sure that your system as well
as the connected attachments support the USB interface.
If driver installation is required, please consult the USB
section of the user manual.
Internet connection with speed of up to10/100Mbps
Connects to printer
Connects to serial-based mouse or data processing devices
Connects to 15pin D-Sub device such as a monitor
Connects to speakers or headphones
Connects to optical devices, CD players and other audio
input devices
Connects to microphone
34
33
40
39
LAN
Line In
Line Out
MIC In
USB