Honeywell Dolphin 7800 Quick Start Manual page 11

Installing the SIM Card and/or Memory Card
1. Turn OFF the terminal.
2. Release the hand strap and remove the battery pack.
3. Remove the screws and the protective shield covering the SIM/memory
card socket.
4. Unlock the SIM card latch by sliding the latch toward the stylus slot.
5. Lift the latch to reveal the SIM socket and the memory card latch.
Note: If a SIM card is installed, remove the card to reveal the memory
card latch.
3
If you are not installing a memory card, skip to step 10.
6. Unlock the memory card latch by sliding the latch toward the top of the
terminal.
7. Lift the latch to expose the memory socket.
8. Insert the MicroSD or MicroSDHC card.
6
4
7
5
8