Operating Temperature; Manual Operation - Turbo Air TAS-18MVHN/O Owner's Manual

NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.

Operating temperature

Mode
Temperature
Room temperature
Outdoor temperature
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection features
may come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure,
the surface of the air conditioner may attract condensation. Please sets the vertical air flow louver
to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.

Manual operation

Manul operation can be used temporarily in case you can not find the remote controller or
test running purpose or maintenance necessary.
Manual
control button
Manual
control button
AUTO/COOL
Cooling operation
>17 (62.6 )
0 (32 ) 50 (122 ) ~
( -15 (5 ) ~ 50 (122 ) F or the models with
low temperature cooling system)
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
Open and lift the front panel up to an angle
1
until it remains fixed with a clicking sound.
One press of the manual control button will
2
lead to the forced AUTO operation. If press
the button twice within five seconds, the unit
will operate under forced COOL operation.
Close the panel firmly to its original
3
position.
NOTE: For DUCT and CEILING type, CASSETTE
type, CEILING and FLOOR type and FLOOR and
STANDING type, please refer to the previous pages
to operate the Manual button.
13
OPERATING INSTRUCTIONS
Heating operation Drying operation
<30 (86 )
0 (32 )
-15 ( 5 ) ~ 24 (75.2 )
>10 (50 )
~ 50 (122 )