Turbo Air TAS-18MVHN/O Owner's Manual page 11

OPERATING INSTRUCTIONS
Identification of parts
Floor and standing type(console)
Indoor unit
1
2
1
3
10
Display panel
Infrared signal receiver
1
2
4
5
6
7
8
9
3
4
Indoor unit
1. Air flow louver (at air outlet)
2. Air inlet(with air filter in it)
3. Remote controller
4. Installation part
5. Display panel
6. Connecting pipe
Outdoor unit
7. Drain hose, refrigerant connecting pipe
8. Connective cable
9. Stop valve
10. Fan hood
DISPLAY PANEL:
OPERATION indication lamp
This indicator illuminates when the unit is
operational.
TIMER indication lamp
Lights up during Timer operation.
DEFROST indication lamp
or Fan only indication lamp
models only)
:
(Cooling only type)
Lights up when the air conditioner starts
defrosting automatically in heating operation
or fan only mode is selected.
Temporary button
This button is used to operate the unit temporarily
in case you misplace the remote controller or
its batteries are exhausted. One press of the
manual control button will lead to the forced
AUTO operation. If press the button twice within
five seconds, the unit will operate under forced
COOL operation. The forced COOL operation
is used for testing purposes only, please do
not choose it unless it is necessary.
10
(Cooling & Heating