Tips For Great Results; Using The Multipurpose Blade - KitchenAid KFP0722 Instructions Manual

Hide thumbs Also See for KFP0722:
Table of Contents

Advertisement

Available languages

Available languages

TIPS FOR GREAT RESULTS

Using the multipur_pose blade
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
To chop fr_esh fr_uits or_
vegetables:
Peel, core, and/or remove seeds.
Cut food in 1 to 1
3.75 cm) pieces. Process food
to desired size, using Low speed. Scrape
sides of bowl, if necessary.
To pur_ee cooked fr_uits and vegetables
(except potatoes):
Add 1/4 cup (60 ml) liquid from recipe per
cup (235 ml) of food. Process food, using
short pulses, until finely chopped. Then
process continuously until reaching desired
texture. Scrape sides of bowl, if necessary.
To pr_epar_e mashed potatoes:
Shred hot cooked potatoes using the
shredding disc. Exchange shredding disc
for multipurpose blade. Add softened butter,
milk, and seasonings. Pulse 3 to 4 times,
2 to 3 seconds each time, until smooth
and milk is absorbed. Do not over process.
To chop dr_ied (or_ sticky) fr_uits:
The food should be cold. Add 1/4 cup
(60 ml) flour from recipe per 1/2 cup
(120 ml) dried fruit. Process fruit, using
short pulses, until reaching desired texture.
To finely chop citrus peel:
With sharp knife, peel colored portion
(without white membrane) from citrus.
Cut peel in small strips. Process until
finely chopped.
To mince gar_lic or_ to chop fr_esh her_bs
or_ small quantities of vegetables:
With processor running, add food through
the feed tube. Process until chopped. For
best results, make sure work bowl and herbs
are very dry before chopping.
To chop nuts or_ make nut butter_s:
Process up to 3 cups (710 ml) of nuts
to desired texture, using short pulses,
1 to 2 seconds each time. For a coarser
texture, process smaller batches, pulsing
1 or 2 times, 1 to 2 seconds each time.
Pulse more often for finer texture. For
nut butters, process continuously until
smooth. Store in refrigerator.
NOTE: Processing nuts and other hard
foods may scratch the surface finish on
the inside of the bowl.
To chop cooked or_ r_aw meat,
/
-inch (2.5-
1
poultr_y, or_ seafood:
2
The food should be very cold. Cut in
1-inch (2.5 cm) pieces. Process up to
1 pound (455 g) at a time to desired size,
using short pulses, 1 to 2 seconds each
time. Scrape sides of bowl, if necessary.
To make br_ead, cookie, or_
cr_acker_ cr_umbs:
Break food into 1
pieces. Process until fine. For larger pieces,
pulse 2 to 3 times, 1 to 2 seconds each
time. Then process until fine.
To melt chocolate in a r_ecipe:
Combine chocolate and sugar from recipe
in work bowl. Process until finely chopped.
Heat liquid from recipe. With processor
running, pour hot liquid through the feed
tube. Process until smooth.
To gr_ate har_d cheeses, such as
Par_mesan and Romano:
Never attempt to process cheese that
cannot be pierced with the tip of a sharp
knife. You can use the multi-purpose
blade to grate hard cheeses. Cut cheese
in 1-inch (2.5 cm) pieces. Place in work
bowl. Process, using short pulses, until
coarsely chopped. Process continuously
until finely grated. Pieces of cheese can
also be added through the feed tube while
the processor is running.
/
to 2-inch (3.75-5 cm)
1
2
15

Advertisement

Table of Contents
loading

Table of Contents