Temperature Selection; Sleep Mode; Remote Control; Regulating The Air Flow Direction - Amcor AMB12KE410A Instruction Manual

If the unit is in AUTO mode, it will select the fan speed automatically
according to the ambient temperature (the related LED will light up), at this
time the fan speed button is inoperative.

Temperature selection

Press the
from 18 °C to 32 °C).
The display
or
temperature .
The pre-set room temperature of this unit is higher than 23 °C for cooling.

Sleep mode

This mode can only be used when cooling is selected. Press the
Every hour the temperature will rise with 1 °C, to a maximum of 2 °C. After
12 hours the unit will switch off automatically. Press the
cancel sleep mode. In the sleep mode the set temperature can not be changed.

Remote control

All the above functions can also be performed with the supplied remote
control. This remote control requires 2 AAA-batteries to operate.

Regulating the air flow direction.

Turn the roller on the air vent
to control the air flow direction
from the vertical louvres.
Notice!
• To prolong the unit's life, it will start 3 minutes after the unit was switched on.
After switching off, please wait at least 3 minutes before switching it on again.
• The cooling will switch off when the room temperature is lower than the set one.
The fan, however, keeps working at the set level. If the ambient temperature
rises above the chosen value, the cooling will resume.
or button to select the temperature you desire (ranging
will show the temperature you set
button. Otherwise, it will always display the ambient
as you press the
Move the air vent directly to
adjust the air flow direction
from the horizontal louvres.
button.
button again to
7