Led Definitions - Motorola DS4208 Product Reference Manual

2 - 4 DS4208 Digital Scanner Product Reference Guide

LED Definitions

In addition to beep sequences, the digital scanner uses a two-color LED to indicate status.
colors that display during scanning.
Standard LED Definitions
Table 2-2
LED
Hand-Held Scanning Standard Use
Green
Red
Off
Hands-Free (Presentation) Scanning Standard Use
Green
Momentarily Off
Red
Off
Parameter Programming
Green
Red
Firmware Update
Red, alternating between
solid and fast blinking
ADF Programming
Green
Blinking Green
Green after Blinking
Red
A bar code was successfully decoded.
Transmission error, conversion or format error, or RS-232 receive error.
No power is applied to the digital scanner, or the scanner is on and ready to scan.
The scanner is on and ready to scan.
A bar code was successfully decoded.
Transmission error, conversion or format error, or RS-232 receive error.
No power is applied to the digital scanner, or the scanner is in low power mode.
Number expected. Enter value using numeric bar codes.
Successful program exit with change in parameter setting.
Input error: incorrect bar code, programming sequence, or Cancel scanned.
Firmware download is completing (user should wait for this indicator to complete before
using the scanner). This indicator is followed by a low/medium/high power up beep.
Enter another digit. Add leading zeros to the front if necessary.
Enter another alphabetic character or scan the End of Message bar code.
All criteria or actions cleared for current rule, continue entering rule.
Delete last saved rule. The current rule is left intact.
All rules deleted.
Enter another criterion or action, or scan the Save Rule bar code.
Rule saved. Rule entry mode exited.
Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit
rule entry.
Out of rule memory. Erase some existing rules, then try to save rule again.
Entry error, wrong bar code scanned, or criteria/action list is too long for a rule. Re-enter
criterion or action.
Table 2-2
Indication
defines LED