Advertisement
Available languages
Available languages
Check motor safety filter occasionally
and
change when dirty.
IbWARNING
Electrical Shock Hazard
Unplug power cord from electrical
outleL
Do not operate the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure andlor
electrical shock.
Remove the bag as outlined in the BAG
CHANGING
section.
MOTOR SAFETY
FILTER
ELECTROSTATIC
This filter must be replaced when dirty.
It
should be replaced regularly depending
on
use conditions. The filter CANNOT
be
washed
as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
motor safety filter number.
1. Lift the rubber
retainer and pull
out motor safety
filter as shown.
Rubber
Retainer
r/ // //
2. Replace the fil-
ter, white side out,
facing the dust bag,
by sliding it back
into place under
the ribs in the bag
cavity. Tuck filter in
so that it fits com-
pletely under the
rubber retainer.
3. Replace the bag as outlined in the BAG
CHANGING
section.
16
Advertisement
