Table of Contents
Advertisement
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury,
HANDLE ASSEMBLY
Before assembling your vacuum cleaner, be
sure you have all the parts as shown in
PARTS AND FEATURES.
Remove the screw located just below the
top edge of the back of the vacuum.
Position the handle as shown in the illustra-
tion below.
Slide the handle into the opening at the top
of tile vacuurn.
Insert the screw so it passes through the
handle into the vacuum.
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly,
Advertisement
Table of Contents
