Sharp HT-SL70 Operation Manual page 8

HT-SL70 and HT-SL75 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Notes:
• This product is recommended for flat panel TV (LCD and plasma).
• For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
• This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled. For detail, refer to the operation manual of the TV.
• For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.
• For TV without HDMI, headphone or RCA (variable output) connection is required.
• This unit supports HDMI which enables ARC (Audio Return Channel).
Recommended Connection:
TV Type CEC FUNCTION
HDMI MUST BE ENABLED
(with ARC)
with HDMI MUST BE ENABLED
HDMI TV without
CEC & ARC or non
HDMI TV
NONE
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
CONNECTION METHOD
Page 8, Method 1
Page 8, Method 2
Page 9, Method 1
Page 9, Method 2
The illustrations printed in this operation manual are for the model HT-SL70.
Accessories
The following accessories are included. This product has no remote control.
RCA to Headphone
Cable (1pin - 2 pins) x 1
Subwoofer Stand
x2
Audio Cable x 1 HDMI Cable x 1
Wall Mount
Angle x 2
J ::
:: J
J
Speaker Wire
Sound Bar Stand
x2
Pattern Paper Screw for
Brackets x 6
For HT-SL75 only.
/
I
Wall Mount
Bracket x 2
Sound Bar Stand
Cushion x 2
SoundBarCoverJoint
for 60"(152 cm)TV(short)x 1
Sound Bar Cover Joint
for 70" (177cm) TV (long) x 1
t ;>
oJ
n
o
E
E
p,,.
LO
StandCoverx 2
O4
03
n
03
v
E
E
03
03
J
StandBasex 2
D_ rtlo_ded _:_om www.Manualslib.com mare als se_lcll engine
E-1