Tyre Inspection; Tyre Rotation - Cadillac 2014 SRX Owner's Manual

Hide thumbs Also See for 2014 SRX:
Table of Contents

Advertisement

10-48
Vehicle Care
8. Proceed to the passenger side
front tyre, and repeat Step 7.
9. Proceed to the passenger side
rear tyre, and repeat Step 7.
10. Proceed to the driver side rear
tyre, and repeat Step 7. The
horn sounds twice to indicate
the sensor identification code
has been matched to the driver
side rear tyre, and the TPMS
sensor matching process is no
longer active. The TIRE
LEARNING ACTIVE message
on the DIC display screen
goes off.
11. Shut the ignition off.
12. Set all four tyres to the
recommended air pressure
level as indicated on the Tyre
and Loading Information label.

Tyre Inspection

We recommend that the tyres,
including the spare tyre, if the
vehicle has one, be inspected
for signs of wear or damage at
least once a month.
Replace the tyre if:
The indicators at three or
more places around the tyre
can be seen.
There is cord or fabric
showing through the tyre's
rubber.
The tread or sidewall is
cracked, cut, or snagged
deep enough to show cord or
fabric.
The tyre has a bump, bulge,
or split.
The tyre has a puncture, cut,
or other damage that cannot
be repaired well because of
the size or location of the
damage.

Tyre Rotation

Tyres should be rotated at the
intervals specified in the
Maintenance Schedule. See
Scheduled Maintenance on
page 11-1.
Tyres are rotated to achieve a
uniform wear for all tyres. The
first rotation is the most
important.
Anytime unusual wear is
noticed, rotate the tyres as soon
as possible, check for proper
tyre inflation pressure, and
check for damaged tyres or
wheels. If the unusual wear

Advertisement

Table of Contents
loading

Table of Contents