Wireless Settings - D-Link RangeBooster DAP-1353 User Manual

Section 3 - Configuration
Wireless Network
Service Set Identifier (SSID) is the name
Name:
of your wireless network. Create a name
using up to 32 characters. The SSID
is case-sensitive, and set to dlink by
default.
Wireless
Indicates the channel setting for the
Channel:
DAP-1353. The Channel can be changed
to fit the channel setting for an existing
wireless network or to customize the
wireless network.
Enable Auto
E n a b l e d b y d e f a u l t , a l l o w s t h e
Chanel Scan:
DAP-1353 to select the channel with the
least amount of interference.
Select the appropriate 802.11 mode
802.11 Mode:
based on the wireless clients in your
network. The drop-down menu options are 802.11g Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed
802.11b/g/n.
Channel Width:
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the pull-down menu. Select 20MHz if you
are not using any 802.11n wireless clients.
Transmission
Select the transmission rate. It is strongly suggested to use the Best setting for optimal performance.
Rate:
Visibility Status:
Select Invisible if you do not want the SSID to be broadcast by the DAP-1353. This prevents the SSID from being seen
by Site Survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1353 in order to
connect to it.
Wireless
Select a wireless security setting. Options are None, WEP, WPA, WPA2 or WPA2-Auto. See p. 34 for a detailed explanation
Security Mode:
of the wireless security options.
D-Link DAP-1353 User Manual

Wireless Settings

1