TH-103PF12U
2. Remove 19 screws and then remove the Side Angle (L).
9.3.2.
Removal of Side Angle (R)
1. Disconnect the connectors (DS15, P34).
2. Remove 2 screws ( ).
3. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
4. Remove the Side Power Unit.
5. Remove 4 screws (B) of the Plate.
6. Remove 19 screws and then remove the Side Angle (R).
9.4.
Removal of HHH-Board
1. Remove 4 screws (C) and then remove the HHH Terminal
Block.
2. Remove 4 screws (D).
3. Remove 4 screws (E) and then remove HHH-Board.
26