On-Screen Display Menus; Custom Menu - Bosch UML-172-90 User Manual

High Performance LCD Monitors
4.
5.
6.
7.
8.
9.
10. Press the Menu button again to exit the OSD menu bar.
7.3

On-screen Display Menus

There are four (4) on-screen menus that allow you to customize your settings. Press the Menu
button to access the OSD menu.
Icon
7.4

Custom Menu

To access the Custom menu, press the Menu button on the front panel of the monitor. Next,
press the right arrow and then press the up and down arrows to select a submenu. Press the
left and right arrow buttons to increase or decrease the values. When finished, press the
Menu button to save any changes, then press the Menu button again to exit the OSD.
Custom
:Move
Table 7.1 Custom Menu (Video Mode)
Bosch Security Systems, Inc.
Press the Menu button to activate the main menu selections (see Figure 3.1 or
Figure 3.2).
Press the and buttons to select a menu.
Press the Input button to enter the selected menu.
Press the and buttons to select a sub-menu item.
Press the and buttons to toggle the OSD values.
Press the Menu button to exit the selected menu and to return to the menu bar or to
confirm a selection.
Menu Function
Custom Adjusts the Brightness, Contrast, Color, Tint, and the Sharpness
level for video performance of the OSD. (The menu options differ
between the Video and PC modes.)
Picture / Sound Adjusts the Picture Mode, Color Tone, Mute, Volume, Size, and the
PC settings. (The menu options differ between the Video and PC
modes.)
PIP Adjusts the Input Source, Size, Position, Swap, and the Sound
Select settings.
Set Up Enables user to Reset the factory default settings and to adjust the
Language, OSD Tone, Blue Screen, and the Key Lock settings.
Brightness 50
Contrast 50
Color 50
Tint 50
Sharpness 20
:Input :Menu
User's Manual
Navigating the Monitor | en
F.01U.075.713 | 1.0 | 2008.03
19