ViewSonic Pro8520HD User Manual page 30

NetWork
Information
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise
Reduction, Keystone and Filter Mode.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.
Wired LAN
Default Gateway
Wireless LAN
Connection Mode
Network Restart
Input Source
MAC Address
Filter Hours*2
Filter Hours Reset*2
Equivalent Lamp Hours
Equivalent Lamp Hours
Reset
Factory Default
23
http://www.pureglare.com.au
Disconnect, Connect
Status
On, Off
DNS
Apply
Disconnect, Connect
Status
SSID
AP, Infrastructure
Yes, No