Magnavox MDVDVCR5 Manual page 26

Preferences
1. OSD On/Off. (OSD - On Screen
Display)
The OSD On/Off control is set to "ON" mode
before shipping and it can be changed to
"OFF" mode.
(1) Press the [SETUP] button to call the Main
SETUP screen. Press the [
select the line of "Preference" and press the
[ENTER] button to confi rm that.
(2) Press the [ / ] buttons to select the line
of "OSD" and press the [ENTER] button to
select.
Search
1. Go to Zero
(1) Press the [SETUP] button to call the Main
SETUP screen in [cassette-in] state. Press the
[ / ] buttons to select the line of
"Search" and press the [ENTER] button to "Search" and press the [ENTER] button to
confi rm that.
(2) Press the [ / ] buttons to select the line
of "GO TO ZERO" and press the [ENTER]
button to confi rm that.
Then, the sub-SETUP picture will disappear and
the VCR will wind a tape to the position, "0:00:00"
and will play automatically. Also, the OSD picture
will disappear after 3 seconds from stopping the
wind.
/ ] buttons to
26
SETUP
Clock set
Record timer
Installation
Search
Preferences
ENTER: Confirm SETUP: End
SEARCH
Go to zero
Index +
Index -
ENTER :Confirm SETUP: End
(3)
Super-Imposed
REW SP
GO TO ZERO
0:00:30
or
Super-Imposed
FF SP
GO TO ZERO
-0:00:30