Edit A Port Forwarding Service - NETGEAR Nighthawk X6 AC3200 User Manual

If the application uses a single port, enter the same port number in the External Ending
Port field.
If the application uses a range of ports, enter the ending port number of the range in the
External Ending Port field.
11. Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Type the port numbers in the Internal Starting Port and Internal Ending Port fields.
12. In the Internal IP address field, type the IP addressor select the radio button for an attached
device listed in the table.
13. Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering screen.

Edit a Port Forwarding Service


To edit a port forwarding entry:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5. Leave the Port Forwarding radio button selected as the service type.
6. In the table, select the radio button next to the service name.
7. Click the Edit Service button.
The Ports - Custom Services screen displays.
8. Change the settings as needed:
9. Click the Apply button.
Your changes are saved.
Nighthawk X6 AC3200 Tri-Band WiFi Router
Specify Internet Port Settings
149