Multifeed Detection At Manual Feed Mode - Fujitsu FI-5900C Operator's Manual
Image scanner
Hide thumbs
Also See for FI-5900C:
- Operator's manual (257 pages) ,
- Getting started (30 pages) ,
- Consumable replacement and cleaning instructions (24 pages)
Table of Contents
Advertisement
8.5 Multifeed detection at manual feed
mode
Set whether to detect multifeed during manual feed mode or not.
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page
2.
Select [Device Setting 2] from left side list in the window, and select
[Multifeed detection when scanning in manual feeding mode] from its
lower level.
3.
Select one of the following option.
Disable:
Follow driver settings:
184
8.5 Multifeed detection at manual feed mode
170.
Does not detect multifeed at manual feed mode.
Multifeed detection is valid only when device driver allows mul-
tifeed detection.
Advertisement
Table of Contents
