Setup; Guide Setup; Cable Box Setup - Motorola DCT2500 User's Reference Manual

Setup

You can activate and customize certain i-Guide features such as the Flip Bar, Lock options, Cable Box settings,
Audio settings and Languages from the Setup Menu.

Guide Setup

Use your remote to select Setup from the Main Menu, then use
the buttons to select from the following setup options:
• Flip Bar Position – The Flip Bar can appear either at the
top or bottom of your screen
• Flip Bar Timeout – Change the amount of time in which
the Flip Bar will stay on your screen from 3 to 15 seconds
• Auto-Tune –
• Yes – Automatically tunes after 2 seconds when you
enter numbers directly on your remote
• No – Enter 3 digits or press OK after entering
numbers on the remote
• Message – Select On to make the message envelope appear when a
new message is received
• Reminder Notice – Adjust the amount of time before the start of a
program in which the Reminder Notice will appear from 1–15 minutes
• Listing Grid Height – You can adjust the listings to display single- or
dual-height grid display from the Guide Set-Up Menu

Cable Box Setup

Time Display –
• Off - Displays the currently tuned channel on the front
of the terminal
• On - Displays the current time on the terminal
AC Outlet –
• Switched - Determines that power is available only when the terminal is on
• Unswitched - Means that power is always available to the outlet on the back of the terminal
See Configuration –
• Choose Yes to show the configuration screen (includes information your cable company may need in the
event of a problem with your service)
30