Panasonic KX-TG3411BXH Service Manual page 54

KX-TG3411BX/KX-TG3412BX/KX-TG3419BX/KX-TGA341BX
12.8.1.2. Handset
First, operate the PC setting according to The Setting Method of JIG (P.44).
Then download the appropriate data according to the following procedures.
EEPROM (IC3)
X'tal (X1)
Note:
(*1) W: country code, XXX_YYY: revision number
"W", "XXX_YYY" vary depending on the country version. You can find them in the batch file, PNZZ- mentioned in The Setting
Method of JIG (P.44).
Items
Adjusted parameter data is stored in memory.
(country version batch file, default batch file,
etc.)
System clock
How to download/Required adjustment
1) Default batch file: Execute the command "default.bat".
2) Default batch file (remaining): Execute the command
"TGA341_DEF_RevXXX_YYY.bat". (*3)
3) Country version batch file: Execute the command
"TGA341_W_RevXXX_YYY.bat". (*3)
4) Bandgap voltage, frequency adjustment Battery monitor
check & Battery Low confirmation: Refer to Adjustment of
Handset (P.49).
Clock adjustment data is in EEPROM, adjust the data again
after replacing it.
1) Frequency adjustment: Refer to
(P.49).
54
Adjustment of Handset