Other Options - Invacare Action 3 Junior User Manual

The recommended distance between anti-tippers small
wheels and floor is 3 to 5 centimetres ; this adjustment is
required with reference to the position and diameter of the
rear wheel.
Push down the button (C in photo 28 & A in figure 30) and
adjust the wheels holding tube for the desired distance based
upon the preset holes.
Make sure that the dog points locates in and protrudes
through its appropriate location hole in the frame tube in
order to prevent any falls.
Tipping lever (photo 31) : it allows the attendant to easily tip
the wheelchair when crossing an obstacle (pavement, step,
etc.) ; push down the lever with your foot (right or left) and
maintain balance using the push handles.
The tipping lever is mounted the same as the anti-tippers, in
the same tube.
A
3 cm mini
30
Note : Make sure that the anti-tipper wheel is ALWAYS
located out side the rear wheel volume.
All these adjustments and changes of position must be per-
formed by a professional technician because these can affect
the stability and the safety of the user ! Please consult your
dealer.
2.6.4. Other option
- Transparent tray (photo 32) : it is positioned on the arm-
pads of the armrests. Slide the tray forward or backward
based upon the user's build.
Do not place very heavy and unstable objects,
containers with very hot and corrosive liquids on the tray,
which may cause serious injury if they fall.
31
32
29