Compatibility In Lan Network; Connection Via Hub - Sony PCS-1 System Integration Manual

3-1. Connection via Hub

LAN1
Teleconference
terminal A
192.100.10.10
Example of system
When a call is initiated from teleconference terminal A to teleconference terminal B.
1. The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
NAT Mode:
NAT Address:
Packet Resend Request: Blank
Adaptive Rate Control: OFF (Set to ON when a packet loss occurs frequently.)
LAN Mode:
Port Number Used:
TCP Port Number:
UDP Port Number:
TOS:
PPPoE:
PPPoE User Name:
PPPoE Password:
PCS-1/1P
Section 3

Compatibility in LAN Network

HUB
OFF
Enter any name.
Local IP address (192.100.10.20)
Depends on a network. Usually, set to 255.255.255.0.
Blank
Blank
OFF
Blank
Blank
Blank
OFF
Blank
public
Videoconference Device
Blank
Blank
OFF
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to "4-2. PCS-1/1P and Hub setting".)
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
OFF
OFF
Blank
Blank
LAN2
Teleconference
terminal B
192.100.10.20
3-1