Dhd Controller Rear Panel; Outputs; Inputs - Runco FlPL-50XA Owner's Operating Manual

Controls and Functions
2.3
DHD Controller Rear
Panel
Serial No
Runco International
Union City, CA

OUTPUTS

R/Pr G/Y B/Pb
Video Processor / Controller
H V H/V
1
Figure 2-4. DHD Controller Rear Panel
Outputs

Inputs

Figure 2-4 shows the rear connector panel on the DHD Controller.
R/Pr G/Y
Model
R/Pr G/Y
DVI Out DVI 1
2 3
1. ANALOG OUTPUTS (RGBHV)
Connect these to the PC/RGB input of the PlasmaWall, using a DB15HD-to-5 x BNC
breakout cable.
2. DVI OUT
Connect this to the DVD/HD3 input on the PlasmaWall, using a DVI-to-HDMI cable.
3. DVI 1 / DVI 2 (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner
with a DVI or HDMI output.
4. HD1 / HD2 (Analog BNC connectors)
Five, BNC connectors for connecting either RGB or component high-definition
television signals. The PlasmaWall automatically detects the signal format: RGB(HV)
or YPrPb, 480p, 720p, 480i, 576i or 1080i.
5. COMPONENT VIDEO (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
Tip
4
INPUTS
B/Pb H V
HD1
HD2
B/Pb H V
SDI
Pb Pr Y
DVI 2 Option Component Video
5
For best results, do not run your DVD player in progressive mode.
10
8 10
SYSTEM CONTROL INTERFACE
TRIGGERS
IR
1 2 3
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
S-Video 1
Video S-Video 2 RS-232 Out RS-232 Control
6 7 9 11
Runco PlasmaWall Owner's Operating Manual
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
12 13 14