Controlling Connected Computers Or Other Programs And Telephone Data Service (For Hipath 3500/3550/3700/3750 Only) - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
Consultation
Controlling Connected Computers
or Other Programs
and Telephone Data Service
(For HiPath 3500/3550/3700/3750 only)
If this function has been configured (contact the service
personnel), you can control connected computers or
programs running on them, such as hotel services or in-
formation systems, from your telephone.
Precondition: You have set up a connection.
Press the key. LED flashes. Enter the code.
qhf
The connected computer now prompts you to enter the
data, which you can do in one of two ways. Contact the
service personnel to find out which option is pro-
grammed in your system:
• Input in en-bloc mode
d m
... Enter data.
r
Press this key at the end of the entry.
or • Input in online mode:
The connected computer processes your entries di-
rectly.
r
Enter the code.
d m
... Enter data.
Using Other Functions/Services
43