Cd-Rom Drive - Toshiba TECRA M3 User Manual

CD-ROM drive

For more information, refer to Chapter 4,
Problem
You cannot access a CD in
the drive
Some CDs run correctly,
but others do not
User's Manual
Operating Basics
Procedure
Make sure the drive's disc tray is securely
closed. Press gently until it clicks into place.
Check whether the drive power is on. If the
power is off, click on the optical media drive
icon in the task tray and turn on the power.
Open the disc tray and make sure the CD is
properly seated. It should lie flat with the
label facing up.
A foreign object in the disc tray could block
laser light from reading the CD. Make sure
there is no obstruction. Remove any foreign
object.
Check whether the CD/DVD is dirty. If it is,
wipe it with a clean cloth dipped in water or
a neutral cleaner. Refer to the
section in Chapter 4 for details on cleaning.
The software or hardware configuration may
be causing a problem. Make sure the
hardware configuration matches your
software's needs. Check the CD's
documentation.
Check the type of CD you are using. The
drive supports:
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-
ROM Mode 1, Mode 2, CD-
ROM XA Mode 2 (Form1,
Form2), Enhanced CD (CD-
EXTRA), Addressing Method
2
If problems persist, contact your dealer.
Troubleshooting
Media care
TM
9-9