Table of Contents
Advertisement
TG4311BX.book Page 26 Monday, November 10, 2008 9:32 AM
Caller ID Service
2
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
3
To call back, press {C}.
To exit, press {OFF}.
Note:
L If the item has already been viewed or
answered:
– "Q" is displayed. (KX-TG4311)
– "Q" is displayed, even if the item
was viewed or answered using
another handset. (KX-TG4312)
L If an arrow "→" is displayed after the
number, the whole phone number is
not shown. Press {>} to see the
remaining numbers. To return to the
previous display, press {<}.
Storing your area code
We recommend storing your area code
before using Caller ID (page 25). Calls
from the same area will be recorded in
the caller list without the area code. You
do not have to remove it before calling
back the caller or storing in the
phonebook.
1
{MENU} i {#}{2}{5}{5}
2
Enter your area code (8 digits max.).
L To correct a digit, press {<} or
{>} to move the cursor, then
press {Clear}. Enter the correct
number.
3
{Save} i {OFF}
To erase your area code
1
{MENU} i {#}{2}{5}{5}
2
Press and hold {Clear} until all
digits erased. i {Save} i
{OFF}
26
Editing a caller's phone
number before calling back
You can edit a phone number in the
caller list.
1
{View CID}
2
{V}/{^}: Select the desired entry.
i {Select} i {Edit}
3
Add or erase digits to the beginning
of the number as necessary.
L To add a digit, press the desired
dial key.
L To erase a digit, press {Clear} or
{#}.
4
{C}
Note:
L The edited phone number is not saved
in the caller list.
Erasing selected caller
information
1
{View CID}
2
{V}/{^}: Select the desired entry.
3
{Erase} i {Yes} i {OFF}
Erasing all caller information
1
{View CID}
2
{All erase} i {Yes}
Storing caller information into
the phonebook
1
{View CID}
2
{V}/{^}: Select the desired entry.
i {Select}
L To edit the number, press {Edit},
then edit the number (see step 3
on "Editing a caller's phone
number before calling back", page
26).
3
{Save}
Advertisement
Table of Contents
