Two-Stage Cooking - Kenmore 99721 Use And Care Manual

TWO-STAGE COOKING
Two-stage cooking lets you cook in one stage at a certain
power level for a chosen time or temperature and then in a
second stage at a different power level for a chosen time or
temperature. To set both stages before starting the oven,
simply follow these steps:
I. Touch CLEAR.
2. Touch TIME or TEMP CONTROL.
Lights above TIME or TEMP and below STAGE 1 go
on. Display Window will read "0" or "F",
3. Touch Numbers for time or temperature of the first
cooking stage.
4. Touch COOK CONTROL Light above COOK goes on.
Display Window will read "HI".
5, Touch Numbers for the Cooking Power level of the first
cooking stage (if other than "HI").
6. Touch MEMORY/RECALL or PAUSE. Light below
STAGE 2 goes on. Display Window will read "0".
7. Touch TIME or TEMP CONTROL.
8. Touch Numbers for time or temperature of the second
cooking stage.
9. Touch COOK CONTROL. Display Window will read
"HI".
I0. Touch Numbers for the Cooking Power level in the
second cooking stage (if other than "HI").
I I. Touch START.
Example:
In preparing a cake mix, the Cookbook calls for a
first stage of 7 minutes at the 50 (SIMMER) power level
followed by a second stage of 3 minutes at 'HI". Here's how
to set the oven:
4. Touch COOK CONTROL.
"HI" will show in the Display
Window to remind you that
the Oven will work at highest
power unless you enter a
lower power setting.
5. Touch numbers "5" then "0".
"50" will show in the
Display Window (telling
that you have set the oven to
run at a 50% power level).
The first stage has been set.
Second Stage (3 minutes; "HI")
6. Touch MEMORY/RECALL.
Light below STAGE 2 will go on.
Display Window will read "0".
........ J
SrBe8 ,,,_
First Stage (7 minutes', 50% SIMMER)
I. Touch CLEAR.
2. Touch TIME.
3. Set 7 minutes by
touching "7", then "0",
and then "0". "700"
will show in the
Display Window.
7. Touch TIME.
8. Set 3 minutes by
touching "3" then "0"
twice, and "300" will
show in the Display
Window. (Power is on "HI".)
2£)