Condensate Drain; Escape Of Gas; Maintenance - IDEAL Logic+ Combi 24 User Manual

CONDENSATE DRAIN

The condensate drain (H) must not be modified or blocked.
Blockage of the condensate drain, caused by debris or freezing, can cause automatic shutdown of the boiler.
If freezing is suspected and the pipe run is accessible an attempt may be made to free the obstruction by pouring hot water
over the exposed pipe and clearing any blockage from the end of the pipe. If this fails to remedy the problem the assistance
of a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII) should be sought.

ESCAPE OF GAS

Should a gas leak or fault be suspected contact the National Gas Emergency Service without delay.
Telephone 0800 111 999
DO NOT SEARCH FOR GAS LEAKS WITH A NAKED FLAME.
CLEANING
For normal cleaning simply dust with a dry cloth. To remove stubborn marks and stains, wipe with a damp cloth and finish
off with a dry cloth. DO NOT use abrasive cleaning materials.

MAINTENANCE

The appliance should be serviced at least once a year by a Gas Safe Registered Engineer or in IE a Registered Gas
Installer (RGII).
11