Manual Exposure - Sony alpha ILCE-5100 Help Manual

Help Guide
How to Use
Interchangeable Lens Digital Camera
ILCE-5100

Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. The shutter speed
and the aperture value can be changed while recording movies.
1. MENU → (Camera Settings) → [Shoot Mode] → [Manual Exposure].
2. Press the bottom side of the control wheel to select the shutter speed or aperture value, then turn the control wheel
to select a value.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to check the exposure value.
Toward +: Images become brighter.
Toward - : Images become darker.
0: Appropriate exposure analyzed by the product
3. Adjust the focus and shoot the subject.
Note
When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure using the
aperture value and shutter speed you have set. If the aperture value and shutter speed you have set are not suitable
for appropriate exposure, the ISO value indicator will blink.
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator
flashes.
The (SteadyShot warning) indicator does not appear in manual exposure mode.
The brightness of the image on the monitor may differ from the actual image being shot.
4-543-698-11(1)
Copyright 2014 Sony Corporation
156