Armrest Width Adjustment - Pride Mobility Vista Owner's Manual

V I I I .
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the Vista’s seat forward or rearward
to one of three settings to adjust the distance between the
seat and the tiller. See figure 10.
1. Remove the seat from your Vista. See IX. “Disas-
sembly and Assembly.”
2. Remove the four bolts that fasten the seat to the seat
platform.
3. Align the seat platform with the desired set of holes on
the seat.
4. Install the four bolts securely.

ARMREST WIDTH ADJUSTMENT

The armrest width of your Vista can be adjusted inward
or outward. See figure 11.
1. Loosen the armrest adjustment knobs at the back of
the seat frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs.
The armrests also pivot upward to make getting on and
off of your Vista easier.
SEAT LOCK LEVER
The seat lock lever locks the seat in one of eight positions.
See figure 12.
1. Pull up on the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in
place.
Vista
C O M F O R T A D J U S T M E N T S
SEAT
PLATFORM
SEAT BOLTS
REPOSITIONING HOLES
FIGURE 10. FRONT-TO-BACK SEAT ADJUSTMENT
ARMRESTS
ARMREST ADJUSTMENT KNOBS
SEAT FRAME
FIGURE 11. ARMREST WIDTH ADJUSTMENT
FIGURE 12. SEAT LOCK LEVER
SEAT LOCK
LEVER
PULL UP TO ROTATE SEAT
31