Advertisement
LP Tank
Tank collar opening must face to front of grill. Loosen wing nut from tank retainer bracket. Set bottom of tank into notches of
tank bracket. Place tank retainer bracket onto tank collar and tighten wing nut.
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use &
Care section). Once cylinder has been filled and leak checked, place cylinder into notches in tank support bracket.Make sure
cylinder valve is facing front of grill. See Use & Care section of this manual to perform the "Burner
Flame
Check" and for important safety instructions before using.
Tank retainer
Advertisement
